| FEATURES FOR RECORDING EN 51 | |
CAUTION: | Biphonic Recording | |
Do not remove the memory card or perform any |
| |
other operation (such as turning off the camcorder) | ||
during deletion. Also, be sure to use the provided | following procedure. | |
AC Adapter, as the memory card may be corrupted | ||
| ||
if the battery becomes exhausted during deletion. If |
| |
the memory card becomes corrupted, initialise it. | Mic for Biphonic | |
| ||
NOTES: | (provided) |
●Be sure to always use the same tape and memory
card together as they were during recording; |
| |
otherwise, the camcorder cannot recognise Tape |
| |
and Memory Card IDs to perform Navigation |
| |
Function properly. | Core filter | |
● Check if an appropriate tape and memory card | ||
are loaded when the following messages appear: |
| |
“UNABLE TO USE NAVIGATION”, “THIS | Audio extension | |
MEMORY CARD IS NOT COMPATIBLE”. | ||
cable (provided) | ||
● If you change the memory card while shooting on | ||
| ||
one tape, two memory cards will share the tape’s |
| |
thumbnail images. We recommend that you use | To MIC connector | |
one memory card for one tape. | ||
|
●Navigation Search does not work if the current
position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, Navigation Function
does not work properly.
Open the cover.
●Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous | 1 Connect the Mic for Biphonic to the MIC |
recording from the relevant memory card. | |
● If you copy thumbnail images from one memory | connector and put them on to your ears. |
card to another via a PC, Navigation Search does | 2 Perform steps 1 – 4 in “Basic Recording” |
not work with the copied memory card. | |
| 3 Set “AUX MIC” to “BIPHONIC”. |
| |
| ● “ ” appears on the display. |
| 4 To start recording, press the Recording Start/ |
| Stop Button. |
| NOTES: |
| ● When you put on Mic for Biphonic, never confuse |
| left and right channel of it. |
| ● During Biphonic |
| recording, be sure to |
| turn your face toward |
| the shooting subject |
| along with the |
| camcorder. Otherwise |
| the sound does not |
| correspond with the |
| footage. |
| ● Some noises may be |
| picked up when you |
| touch the Mic for Biphonic during recording. |
| ● Be sure to set “AUX MIC” to “OFF” when you use |
| a microphone other than the Mic for Biphonic. |