54 EN

EDITING

 

 

 

[A] Using USB cable

 

 

Connection To A Personal Computer

 

 

It is possible to do the following things:

 

 

 

 

 

 

 

 

 

 

[A] Using USB cable [B] Using DV cable

● Transfer still images stored on a memory card

to a PC.

 

 

 

 

 

 

 

 

OR

● Transfer still/moving images recorded on a

 

 

 

tape to a PC.

 

[B] Using DV cable

 

It is also possible to transfer still/moving images

 

to a PC with a DV connector by using the

 

provided software, software equipped with the

To USB

PC or commercially available software.

 

If you are using a Windows® XP, you can use

To DV OUT

Windows® Messenger to conduct video

 

conferences over the Internet, using a

 

camcorder. For details, refer to the help for the

 

Windows® Messenger.

Core filter

DV cable

USB cable (optional) (provided)

Core filter

To USB

To DV connector

connector

 

PC

PC with DV connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

●Connect the DV cable first to the PC, and then to the camcorder.

●Connect the DV cable (plugs) correctly according to the shape of the DV connector.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “USB” is displayed on the LCD monitor since this can result in product damage.