EDITING EN 55

Audio Dubbing

 

To hear the dubbed sound during playback

 

Set “NARRATION” to “ON” or “MIX”.

The audio track can be customised only when

( pg. 37, 41)

NOTES:

recorded in the 12-BIT and SP modes.

( pg. 38)

 

 

● Sound is not heard from the speaker during Audio

● Use the provided remote control.

Dubbing.

 

 

Microphone Connector

● When editing onto a tape that was recorded at

 

 

 

12-BIT, the old and new soundtracks are recorded

 

 

 

separately.

 

 

 

● If you dub onto a blank space on the tape, the

 

 

 

sound may be disrupted. Make sure you only edit

 

 

 

recorded areas.

 

 

 

● If feedback or howling occurs during TV playback,

 

Speaker

 

move the camcorder’s microphone away from the

 

 

TV, or turn down the TV’s volume.

 

 

 

● If you change from 12-BIT to 16-BIT in mid-

 

START/

recording and then use the tape for Audio

 

Dubbing, it is not effective from the point where

 

STOP

Stereo Microphone

 

16-BIT recording began.

 

PAUSE

 

REW

PLAY

 

● During Audio Dubbing, when the tape moves to

INSERT

STOP

 

scenes recorded in the LP mode, scenes

 

A.DUB

 

recorded in 16-BIT audio or a blank portion, Audio

1 Play back the tape to locate the point where

Dubbing stops.

● Audio dubbing is also possible using an optional

editing will start, then press PAUSE (9).

microphone connected to the MIC connector.

2 While holding A. DUB (D) on the remote

● While an optional microphone is connected, the

 

control, press PAUSE (9). The “9D” and “MIC”

built-in microphone is disabled.

 

indicators appear.

 

3 Press PLAY (U), then begin “narrating”.

 

Speak into the microphone.

 

● To pause dubbing, press PAUSE (9).

 

4 To end Audio Dubbing, press PAUSE (9),

 

then STOP (8).