JVC GR-DV5000 Protecting Files, To Remove Protection, To protect the currently displayed file

		EN 27
Protecting Files	To protect the currently displayed file
	9 Rotate the MENU Wheel
The Protect mode helps prevent the accidental	to select “CURRENT”, and	MENU
	press it. The PROTECT	PROTECT CURRENT
erasure of files.		PROT . ALL
	screen appears.	CANC . ALL
		RETURN
MENU Wheel	10 Press 3 or 5 to
Power Switch	select the desired file.
Lock Button	11 Rotate the MENU	PROTECT
Rewind Button (3)	Wheel to select
VIDEO/MEMORY Switch	“EXECUTE”, and press it.
	● To cancel protection,	PROTECTED
	select “RETURN”.	RETURN
	● Repeat steps 10 and 11
	for all files you want to
	protect.

PLAYBACK

SELECT Button

Fast-Forward Button (5)

1Load a memory card. ( pg. 16)

2Set the VIDEO/MEMORY Switch to “MEMORY”.

3Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4Open the LCD monitor fully, or pull out the viewfinder fully.

●The type of file (IMAGE, E-MAIL CLIP or TITLE) which has been played back at the last time is displayed.

If you want to select another type of file, go to step 5.

If not, go to step 7.

5Press SELECT. The MEMORY SELECT screen appears.

6Rotate the MENU Wheel to select the desired type of file, and press it.

7Press the MENU Wheel in. The Menu Screen appears.

8Rotate the MENU Wheel

to select “PROTECT”, and	MENU
	PROTECT
press it. The Sub Menu	DELETE
	DPOF
appears.	NO . RESET
	FORMAT
	D I SPLAY
	BR I GHT
	END

To protect all files stored in the memory card

9Rotate the MENU Wheel to select “PROT.ALL”, and press it. The PROTECT screen appears.

10Rotate the MENU Wheel to select “EXECUTE”, and press it.

● To cancel protection, select “RETURN”.

NOTES:

●If the “” mark appears, the currently displayed file is protected.

●When the memory card is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.

To Remove Protection

Before doing the following, perform steps 1 – 8 in “Protecting Files” in the left column.

To remove protection from the currently displayed file

9Rotate the MENU Wheel to select “CURRENT”, and press it. The PROTECT screen appears.

10Press 3 or 5 to select the desired file.

11Rotate the MENU Wheel to select “EXECUTE”, and press it.

●To cancel selection, select “RETURN”.

●Repeat steps 10 and 11 for all files you want to remove protection.

RECORDING &

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE