EN 43

Motor Drive Mode

 

 

The colour tone changes depending on the

Keeping SNAPSHOT pressed in step 5 provides an

background lighting conditions, such as under

fluorescent or halogen lamps.

effect similar to serial photography. (Interval

While charging the flash, blinks and the flash

between still images: approx. 1 second)

will not fire. Although noise may appear, this is

The Motor Drive mode is disabled when “REC

not a malfunction and is not recorded. It can take

SELECT” is set to “

/

”. ( pg. 39)

up to 10 seconds to charge the flash.

 

 

 

Do not open the flash unit manually or apply an

Snapshot Flash

 

 

unreasonable amount of pressure to it. Doing so

 

 

may cause its position to be changed, making it

 

 

 

impossible to shoot with the correct brightness.

Flash

 

 

Flash Brightness Adjustment

The flash can be used when a snapshot is taken in Record-Standby mode. ( pg. 23, 42)

When the Power Switch is set to “A”, the flash

automatically pops up and fires if it is dark ( appears).

When the Power Switch is set to “M”, you can select the flash setting. ( pg. 31, 37)

When a snapshot ( pg. 23, 42) is taken in the dark the camcorder fires the flash and adjusts the brightness automatically. You can also adjust the flash brightness manually. When you find that the snapshots you took look too bright or too dark, adjust it manually.

1Select “FLASH ADJ.” in MANUAL Menu, and press the MENU Wheel in.

The parameter appears.

2To intensify the flash, rotate the MENU Wheel towards “+”. To weaken the flash, rotate the MENU Wheel towards “–”.

Adjustment range: –3 to +3.

FEATURES

If “AUTO C” is selected...

The C Red-Eye reduction indicator lights. Press SNAPSHOT. The flash fires twice. The first flash is for reduction of the human eye’s red reflection and the second flash is for the actual recording.

After shooting...

Be sure to close the flash by pressing it softly until it locks.

NOTES:

Do not fire the flash at a person at short range.

It is not possible to use the built-in flash when the Video Light or Stereo Microphone (provided with GR-DV5000 only) is attached to the Info-Shoe. Set “B-IN FLASH” to “OFF” in MANUAL Menu.

( pg. 31, 37)

The flash does not fire when the flash is set to “OFF” or when Night-Scope mode ( pg. 42) is engaged, and also when the battery remaining power is low.

When “r” is set to “SPORTS” or “SNOW”

( pg. 33), the flash does not fire even if the flash is set to “ON”.

Although images shot with a flash tend to look whiter than they actually are, to compensate for this the camcorder automatically darkens the picture when using the flash. When shooting a subject at a distance where the flash light cannot reach (over approx. 2 m), set the flash to “OFF” to prevent the picture from becoming too dark or becoming too tinted.

3Press the MENU Wheel in. Rotate the MENU Wheel to select “BRETURN”, and press it twice to close the Menu Screen.

NOTE:

When you change the subject you are shooting or the shooting location, set it back to ±0 as described in step 2 and take a snapshot to check the flash brightness. After doing this adjust to your desired brightness.

ADVANCED

Page 43
Image 43
JVC GR-DV5000, GR-DV4000 instruction manual Colour tone changes depending on, If Auto C is selected, After shooting

GR-DV4000, GR-DV5000 specifications

The JVC GR-DV5000 and GR-DV4000 are compact digital camcorders that emerged in the early 2000s, representing a significant advancement in consumer video technology. Designed for both amateur and semi-professional videographers, these models are equipped with a variety of features and technologies that enhance their usability and video quality.

One of the main highlights of the GR-DV5000 is its 3CCD technology. Unlike traditional single-chip systems, the 3CCD setup uses three separate charge-coupled devices to capture light, which significantly improves color accuracy and depth. This technology allows for vibrant, true-to-life colors, making it an excellent choice for capturing critical moments in life such as weddings or family events. The GR-DV4000, while slightly lower in specification, also showcases commendable performance, providing a good balance of features and affordability.

Both camcorders feature a 10x optical zoom lens, allowing users to get close to their subjects without compromising image quality. This zoom capability is crucial for remote shots, ensuring versatility in various shooting environments, from expansive outdoor scenes to intimate indoor gatherings. The digital zoom feature extends this further, but for professional results, the optical zoom is always preferred.

The GR-DV5000 comes with enhanced manual controls that give videographers more creative freedom. Users can adjust the focus, exposure, and white balance settings manually, which is particularly beneficial when shooting in challenging lighting conditions. On the other hand, the GR-DV4000 focuses more on ease of use, making it perfect for casual users who want to point and shoot without delving deeply into technical settings.

In terms of connectivity and storage, both models utilize MiniDV tapes, which were popular for their capacity to store high-quality video. While this format may seem outdated, it provides reliable playback and archiving without the complications sometimes associated with digital storage.

The LCD screen on both camcorders facilitates easy framing and playback of footage, while the ergonomic design ensures comfort during extended use. The JVC GR-DV5000 also features a built-in stabilization system to help reduce shake during handheld shooting, further enhancing video quality.

In summary, the JVC GR-DV5000 and GR-DV4000 are remarkable camcorders that showcase the technological advancements of their time. Their standout features, such as 3CCD technology, optical zoom, and user-friendly controls, make them valuable tools for capturing memorable moments with clarity and precision. Whether for a professional project or casual use, these camcorders have cemented their place in the history of digital video recording.