EN59
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
25.
•“ON SCREEN” is set to
“OFF” in the Date/Time
Menu.
26.
•You have made the
indicators disappear.
27.
————
28.
•Certain Fade/Wipe effects,
certain modes of Program
AE with special effects,
Picture Stabilizer and other
functions that cannot be
used together are selected at
the same time.
29.
•
The viewfinder is made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly in the viewfinder.
These spots are not recorded
on the tape. This is not due
to any defect of the unit.
(Effective dots: more than
99.99 %)
30.
————
31.
•A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
25.
•Set “ON SCREEN” to “ON”
in the Date/Time Menu
(Z pg. 21).
•Press DISPLAY for longer
than 1 second to make the
indicators appear
(Z pg. 17).
26.
•Press DISPLAY for longer
than 1 second to make the
indicators appear
(Z pg. 17).
27.
•Wipe them gently with soft
cloth. Wiping strongly can
cause damage.
28.
•Re-read the sections
covering Fade/Wipe effects,
Program AE with special
effects and Picture Stabilizer
(Z pg. 18, 27, 28, 30, 31).
29.
————
30.
•Check the section of the
manual that explains
viewfinder indications
(Z pg. 64, 65).
31.
•
Remove the power supply
(battery pack, etc.), clock
battery and wait a few
minutes for the indication to
clear. When it does, you can
resume using the camcorder.
If the indication remains
even though you repeat the
above two or three times,
please consult your nearest
JVC dealer.
25.
The indicators and
messages do not appear on
screen.
26.
The indicators do not
appear.
27.
The viewfinder and the
lens have become dirty
(ex. fingerprints).
28.
The viewfinder indications
blink.
29.
Colored bright spots
appear all over the
viewfinder.
30.
An unusual mark appears.
31.
An error indication (E01 —
E06) appears.
CONTINUED ON NEXT PAGE