JVC GR-DVL210 specifications For Recording, Snapshot Mode Selection, Snapshot Recording

Rotate the MENU/BRIGHT wheel to select “ CAMERA”. Press it and the CAMERA Menu appears.

Rotate the MENU/BRIGHT wheel to select “SNAP MODE”, then press it.

Rotate the MENU/BRIGHT wheel to select the desired Snapshot mode, then press it.

Rotate the MENU/BRIGHT wheel to select “1RETURN” and press it twice. The Menu Screen closes.

FOR RECORDING

SNAPSHOT Button

Lock Button

Power Switch

Display

Menu Screen

SNAP MODE – P I N–UP

FRAME

FUL L

MUL T I – 4

MUL T I – 9

PIN-UP	FRAME
Pin-Up mode*	Snapshot mode with
	frame*

FULL	MULTI-4
Snapshot mode	Multi-Analyzer 4
with no frame*

MULTI-9

Multi-Analyzer 9

*There is the sound effect of a shutter closing.

EN23

Snapshot

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3

4

5

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the normal recording resumes.

•Regardless of the Power Switch position (“ ” or “ ”), Snapshot recording takes place using the selected Snapshot mode.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

●To remove the shutter sound,  “BEEP” on pg. 31, 33.

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot

recording will be performed in the FULL mode during Digital Zoom or Night-Alive (  pg. 24).

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects (  pg. 24) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (  pg. 32), the Stabilizer will be disabled.

●During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image.

●When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

● will appear while the snapshot is being taken.

●During playback as well, all Snapshot modes are available. The shutter sound is not heard.