Power Zoom Lever

Recording Start/ Stop button

Power Switch

Diopter Adjustment Control

EN9

Grip Adjustment

1 Separate the Velcro strip.

2 Pass your right hand through the loop and grasp the grip.

3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference.

Viewfinder Adjustment

1 Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch.

2 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.

PAUSE

Shoulder Strap Attachment

 

 

Make sure the battery pack is removed.

 

 

1 Following the illustration, thread the strap

 

 

through the eyelet 1, then fold it back and

 

 

thread it through the buckle 2. Repeat the

2

1

procedure to attach the other end of the strap to

the other eyelet 3 located under the Grip Strap.

 

 

Confirm the strap is not twisted.

 

3

Tripod Mounting

CAUTION:

When attaching the camera to a tripod, extend its legs to stabilize the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over.

1 To attach the camera to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camera. Then tighten the screw clockwise. Some tripods are not equipped with studs.

Page 9
Image 9
JVC GR-DVL210 specifications Grip Adjustment, Viewfinder Adjustment, Shoulder Strap Attachment, Tripod Mounting