48 EN | SYSTEM | CONNECTIONS |
[A]Using PC connection cable |
|
|
To PC |
|
|
(DIGITAL | PC connection | To |
PHOTO) | cable (optional) | |
OR | PC | |
[B] Using DV cable |
|
|
Power Switch |
|
|
Core filter | Core filter | |
To DV | DV cable | To DV |
IN/OUT | (optional) | connector |
|
| PC with DV |
|
| connector |
Connection To A Personal Computer
[A] Using PC connection cable
This camcorder can transfer still images to a PC by using the software (optional).
[B] Using DV cable
It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.
1
2
3 Turn the camcorder’s Power Switch to “ 
” while pressing down the Lock Button located on the switch and turn on the PC.
•Refer to the instruction manual of the software on how to transfer a still image to the PC.
4 When finished, turn off the PC first, then the camcorder.
NOTES:
●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
●It is recommended to use the AC Adapter as the
power supply instead of the battery pack ( pg. 8).
●Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with a DV
●When using a DV cable, be sure to use the optional JVC
●The system may not work properly depending on the PC or capture board you are using.
