JVC GR-DVL210 specifications EN53

		EN53
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
9. The image taken using	9. • Shooting was performed	9. • Press the BACKLIGHT
Snapshot is too dark.	under backlit conditions.	Button ( pg. 29).
10. The image taken using	10. • The subject is too bright.	10. • Set “PROGRAM AE” to
Snapshot is too bright.		“SPOTLIGHT” in the Menu
		Screen ( pg. 24).
11. Digital Zoom does not	11. • 10X optical zoom is	11. • Set “ZOOM” to “40X” or
work.	selected.	“400X” in the Menu Screen
	•“PROGRAM AE” is set to	( pg. 32).
	“VIDEO ECHO” in the	• Disengage the “VIDEO
	Menu Screen.	ECHO” mode ( pg. 16,
	• Picture Wipe or Dissolve are	25).
	being used in a scene	• Wait until the Picture Wipe
	transition.	or Dissolve effects are
		completed ( pg. 16, 26).
12. The Black & White Fader	12. • The Sepia or Monotone	12. • Turn off Sepia and Mono-
does not work.	mode is activated.	tone ( pg. 24, 26).
13. The Dissolve function does	13. • The Sepia, Monotone or	13. • Turn off Sepia, Monotone or
not work.	Slow Shutter mode of	Slow Shutter before adding
	Program AE with special	Dissolve to a scene
	effects is activated.	transition ( pg. 24, 26).
	•“WIDE MODE” is set to	• Set “WIDE MODE” to
	“SQUEEZE” in the Menu	“CINEMA” or “OFF” mode
	Screen.	( pg. 33).
	• The previously selected	• Make sure you have
	mode of Program AE with	selected the mode of
	special effects was changed	Program AE with special
	after the last selected scene	effects you want before
	for editing was registered.	starting editing ( pg. 24,
		26).
14. The Picture Wipe and	14. • The last selected editing	14. • Select Picture Wipe or
Dissolve functions do not	scene is ending.	Dissolve before beginning
work.	• At the end of the last	recording. The effects are
	selected scene for editing,	then automatically activated
	the Power Switch was set to	( pg. 26).
	“OFF”.	• Do not turn off the
	• The power is off.	camcorder’s power after
		setting Edit-In and Edit-Out
		points, as they will all be
		erased ( pg. 26).
		• The camcorder automati-
		cally shuts off after 5
		minutes have elapsed in the
		Record-Standby mode.
		Make sure you continue
		operations within 5 minutes
		after engaging Record-
		Standby mode ( pg. 26).

CONTINUED ON NEXT PAGE