JVC GR-DVL210 specifications EN21, If using a VCR . . . go to step If not . . . go to step

Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 20).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”

in the Menu Screen ( pg. 35).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen ( pg. 35).

•Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 35).

EN21

NOTES:

●It is recommended to use the AC Adapter as the

power supply instead of the battery pack (  pg. 8).

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable.

Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from the

camcorder without inserting a tape, set the camcorder’s Power Switch to “” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.