JVC GR-DVM76 instruction manual 100 EN

100 EN		INDEX Indications (cont.)
Warning Indications
Indications		Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.		( pg. 16)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power Switch is
PROTECTION TAB	set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”.
			( pg. 14)
HEAD CLEANING	Appears if dirt is detected on the heads during recording. Use an optional
	cleaning cassette.		( pg. 91)
REQUIRED USE
CLEANING CASSETTE
CONDENSATION	Appears if condensation occurs. When this indication is displayed, wait more
	than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
TAPE!	Appears if a tape is not loaded when the Recording Start/Stop Button or
	SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and
	the VIDEO/MEMORY Switch is set to “VIDEO”.
TAPE END	Appears when the tape ends during recording or playback.		( pg. 81)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
SET DATE/TIME!	● Appears when the date/time is not set.		( pg. 15)
	● Appears when the built-in clock (lithium) battery is discharged and the
	previously set date/time is erased.		( pg. 15)
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 70)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
<CANNOT DUB ON A			( pg. 70)
LP RECORDED TAPE>	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
<CANNOT DUB ON A			( pg. 70)
16BIT RECORDING>	● Appears if A. DUB (D) on the remote control is pressed when the erase
<CHECK TAPE’S	protection tab is set to “SAVE”.		( pg. 70)
ERASE PROTECTION	● Appears if Audio Dubbing using Digital Sound Effects is attempted when a
TAB>	memory card is not loaded.		( pg. 71)
<MEMORY CARD>
INSERT ERROR!	Appears if Insert Editing is attempted on a blank portion of a tape.		( pg. 72)