JVC GR-DVM76 Viewfinder indications blink, 200X.
pg, VIDEO/MEMORY Set the VIDEO/MEMORY

					EN 83
6.	During recording, sound	6.	•The optional headphones are	6.	•Connect the optional
	cannot be heard.		not connected to the		headphones to the
			headphones connector.		headphone connector
			(GR-DVM96 only)		(GR-DVM96 only).
			•The sound volume of the		( pg. 95)
			headphones connector		•Adjust the sound volume
			(GR-DVM96 only) was not		during playback. ( pg. 22)
			adjusted appropriately. The
			sound volume at this point is
			the same as the level it was
			adjusted to during playback.
7.	The LCD monitor or	7.	•Certain Wipe/Fader effects,	7.	•Re-read the sections covering
	viewfinder indications blink.		certain modes of Program AE		Wipe/Fader effects, Program
			with special effects, “DIS”		AE with special effects and
			and other functions that		“DIS”. ( pg. 38, 40 –
			cannot be used together are		43, 46)
			selected at the same time.
8.	Digital Zoom does not work.	8.	•10X optical zoom is selected.	8.	•Set “ZOOM” to “40X” or
			•The VIDEO/MEMORY		“200X”. ( pg. 44)
			Switch is set to “MEMORY”.		•Set the VIDEO/MEMORY
					Switch to “VIDEO”.
Video and D.S.C. Playback
	SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
9.	Play, Rewind and Fast-Forward	9.	•The Power Switch is set to	9.	•Set the Power Switch to
	functions do not work.		“A” or “M”.		“P”. ( pg. 22)
			• VIDEO/MEMORY Switch is		•Set the VIDEO/MEMORY
			set to “MEMORY”.		Switch to “VIDEO”.
10.	The LCD monitor image is	10.	•During playback of the	10.
	distorted.		unrecorded portion, High-
			speed Search and still		—
			playback, LCD monitor
			indications appear distorted.
			This is not a defect.
11.	The tape is moving, but there is	11.	•Your TV has AV input	11.	•Set the TV to the mode or
	no picture.		terminals, but is not set to its		channel appropriate for
			VIDEO mode.		video playback.
			•The cassette holder cover is		( pg. 24, 25)
			open.		•Close the cassette holder
					cover. ( pg. 16)
12.	Blocks of noise appear during	12.		12.	•Clean the video heads with
	playback, or there is no		—		an optional cleaning
	playback picture and the				cassette. ( pg. 91)
	screen becomes blue.
13.	A memory card cannot be	13.	•The Power Switch is set to	13.	•Set the Power Switch to
	played back.		“A” or “M”.		“P”. ( pg. 28)
			•The VIDEO/MEMORY		•Set the VIDEO/MEMORY
			Switch is set to “VIDEO”.		Switch to “MEMORY”.

CONTINUED ON NEXT PAGE