JVC GR-DVM76 instruction manual How To Attach The Grip Belt

6 EN

How To Attach The Grip Belt

NOTES:

●It is recommended to use the finger support so that the tally lamp or the flash is unobstructed with your fingers.

●The grip belt can be attached to the camcorder even if the finger support is not used. Be careful not to cover the tally lamp or the flash when holding camcorder without finger support.

1)Thread the finger support with the end of the strap g.

g

2)Thread the loop end g through the eyelet a, then pass the other end of the strap h and the pad through the loop end h.

a

h

g

3)Thread the end of the strap h through the eyelet b.

b

h

4)Thread the end of the strap through the buckle c. Open the pad and fold the end of the strap h in the pad. Then fold the pad.

c

5)Adjust the grip. ( pg. 12)