EN 65

Dubbing Still Images Recorded On A Tape To A Memory Card

Still images can be dubbed from a tape to a memory card.

Play/Pause Button (4/9)

VIDEO/MEMORY

Switch

Power Switch

AY OFF A

M

PL

NOTES:

If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

If an image recorded on the tape using “WIDE MODE” ( pg. 46) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). ( pg. 69)

Images are dubbed in 640 x 480 pixels.

SNAPSHOT Button

MENU Wheel

Lock Button

1Load a cassette. ( pg. 16)

2Load a memory card. ( pg. 17)

3Set the VIDEO/MEMORY Switch to “VIDEO”.

4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

5

Set “

COPY”

 

 

 

to “ON”.

 

 

 

6

( pg. 38, 51)

 

 

Press 4/9 to start

COPY

– OF F

 

ON

7

playback.

 

 

 

At the point you want

 

 

 

to dub, press 4/9

 

 

 

again to engage Still

 

 

8

Playback.

 

 

 

To dub the image,

 

SP

 

press SNAPSHOT.

 

 

 

The ”

” indication

 

 

blinks during dubbing.

The selected image is stored in the memory card.

Page 65
Image 65
JVC GR-DVM76 Dubbing Still Images Recorded On a Tape To a Memory Card, Set, To on  pg Press 4/9 to start