EN 53
NOTES:
●
To change from normal to slow-motion playback,
press PAUSE at the point where you want to start
playback in slow motion, then point the remote
control at the Docking Station's sensor and press
SLOW (Rewind/Forward). After playing back in
slow motion for about 10 to 20 seconds, normal
playback resumes. Speed is 1/10 times normal. To
stop slow-motion playback in progress, press
PLAY.
●
During slow-motion playback, due to digital
image processing, the picture may take on a
mosaic effect.
●
After SLOW is pressed, the still image may be
displayed for a few seconds, then the screen may
become blue back for a few seconds.
●
There may be a small margin between the slow-
motion playback start point you chose and the
start point at which the camcorder actually begins
playback in slow motion.
●
When using the provided AUDIO/VIDEO cable
(Docking Station to TV or VCR), DC cord,
S-VIDEO cable or editing cable, make sure you
connect the end of the cable with the core filter to
the Docking Station. The core filter improves
performance of equipment.
1
CONNECT DOCKING STATION TOTV OR VCR
Connect as shown in the illustration
(Z pg. 52, 53).
2
TURN ON POWER
3
SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
If Using A VCR . . . go to step 4.
If not . . . go to step 5.
4
CONNECT VCR OUTPUT TO TVINPUT
Refer to your VCR’s instruction manual.
5
START PLAYBACK
Press play and your pre-recorded scenes will
be played on your TV.
6
END PLAYBACK
Press STOP and, if you’re not going to
continue using the camcorder, set the Power
Dial to “OFF”.