EN 71
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
30.
•This may occur when the
surface or the edge of the
LCD monitor is pressed.
31.
•The speaker volume is too
great.
32.
————
33.
•Certain FADE/WIPE, P.AE/
Effects and other functions
that cannot be used together
are selected at the same
time.
34.
•The LCD monitor is made
with high-precision
technology. However, black
spots or bright spots of light
(red, green or blue) may
appear constantly on the
LCD monitor. These spots
are not recorded on the
tape. This is not due to any
defect of the unit. (Effective
dots: more than 99.99 %)
35.
•During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
36.
————
37.
•A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
38.
•The temperature of the
battery is extremely high/
low.
•Charging is difficult in
places subject to extremely
high/low temperatures.
39.
•This occurs when recording in
the LP mode is not available.
After the indicator blinks, the
recording mode switches to
"SP" and recording goes on.
30.
————
31.
•Turn the speaker volume
down (Z pg. 73).
32.
•Wipe them gently with soft
cloth. Wiping strongly can
cause damage.
33.
•Re-read the sections
covering FADE/WIPE and
P.AE/Effects
(Z pgs. 34 – 42).
34.
————
35.
————
36.
•Check the section of the
manual that explains
LCD monitor indications
(Z pgs. 74, 75).
37.
•Remove the tape or the
battery pack, and wait a
few minutes for the
indication to clear. When it
does, you can resume using
the camcorder.
If the indication remains,
please consult your nearest
JVC dealer or Technical
Service Center.
38.
•To protect the battery, it is
recommended to charge it
in places with a tempera-
ture of 10°C to 30°C
(Z pg. 9).
39.
————
30.
The indicators and the
image colour on the LCD
monitor are not clear.
31.
Images on the LCD
monitor are jittery.
32.
The LCD monitor and the
lens have become dirty
(ex. fingerprints).
33.
The LCD monitor
indications blink.
34.
Coloured bright spots
appear all over the LCD
monitor.
35.
The LCD monitor
indications are distorted.
36.
An unusual mark appears
in the LCD monitor.
37.
An error indication
(E01 — E07) appears in
the LCD monitor.
38.
The charge indicator on
the AC Power Adapter/
Charger does not light.
39.
The recording mode
indicator "LP" blinks on
the LCD monitor.