JVC GR-DVM801, LYT0002-0F2A manual EN G Etting Started, Charging The Battery Pack

8ENGETTINGSTARTED

Charging The Battery Pack

You can charge one battery pack at a time, or two consecutively.

ATTACH

Battery pack BN-V812U

DETACH

To AC outlet

Power cord

DC jack

Charger indicator 2

Power lamp

Charger indicator 1

AC Power Adapter/
Charger	RED
	BLACK
	Charge marker

•The charge marker does not move by itself. After charging or removing a discharged battery, be sure to set the marker to the predetermined position.

1 SUPPLY POWER TO CHARGER Plug the AC Adapter/Charger's power cord into an AC outlet. The power indicator comes on.

2 ATTACH BATTERY/BATTERIES Make sure the + – marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger.

•The Charge Indicator (1 or 2) begins blinking to indicate charging has started.

3 CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

•If two batteries are attached to the charger, they will be charged in the order that they were attached.

CHARGING TIME

BATTERY	ONE	TWO
BN-V812U	approx. 100 min.	approx. 200 min.

4 DETACH BATTERY/BATTERIES

Slide the battery or batteries in the direction of the arrow and lift off.

•Remember to unplug the AC Adapter/ Charger's power cord from an AC outlet.

Charge Marker

The charge marker makes it easy for you to differentiate between charged and discharged batteries. Choose RED or BLACK to mean charged or discharged, and you'll always know the status of your batteries.