JVC GR-DVM801 Docking Station, Dubbing, Make Connections, Pause Recording, VCR Recording deck

58EN

EDITING

Docking Station

Refer to “Docking Station Attachment” on page 51 for attachment procedures. Make sure the camcorder is attached to the Docking Station before beginning editing.

Dubbing

You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual for details.

E R OFFY A L

C

5S

P

Power Dial

VCR (Recording deck)

PLAY STOP

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR as shown in the illustration on page 52.

2 START PLAYBACK

Press PLAY to play back the source tape.

3 START RECORDING

While watching on the connected TV, engage your VCR’s record mode from the spot on the source tape you want to begin recording.

4 PAUSE RECORDING

Engage your VCR’s pause mode to stop recording a segment.

5 END RECORDING

Press STOP to stop the source tape, and engage the VCR’s stop mode.

NOTES:

●You can use Playback Zoom (☞ pg. 56) or Playback Effects (☞ pg. 57) in step 2.

●Before you start dubbing, make sure that the LCD moitor indications don’t appear on the connected TV. If they do appear during dubbing, they are being recorded onto the new tape.

To clear the Playback Sound Mode Display, press DISPLAY on the RM-V708U or RM-V710U Remote Control.

●Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 54) to show or hide the Date/Time and the Time Code on the recording.

●To show or hide all indications, press the IND/ DISPLAY button on the camcorder.