EN37
1
1M
/I
2N
S
START/STOP
REC. TIME
INT. TIME
FEATURE:
Animation and Time-Lapse
PURPOSE:
The remote control lets you set/release Interval Time
and Recording Time without using the Menu Screen.
OPERATION:

Animation

1)Set
Instead of performing steps 1 and 2 on pg. 27
(“Animation”), press REC TIME on the remote
control. Each time REC TIME is pressed, the
Recording Time indicator appears, changing in the
following order: 1/4S, 1/2S, 1S, 5S and no indication
(off).
2)Release
Instead of using the Menu in step 5 on pg. 27, press
REC TIME on the remote control until the Recording
Time indicator disappears.

Time-Lapse

1)Set
Instead of performing steps 1 through 3 on pg. 27
(“Time-Lapse”), press INT. TIME and REC TIME on
the remote control. Each time INT. TIME is pressed,
the Interval Time indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN and no
indication (off). Each time REC TIME is pressed, the
Recording Time indicator appears, changing in the
following order: 1/4S, 1/2S, 1S, 5S and no indication
(off).
2)Release
Instead of using the Menu in step 5 on pg. 27, press
INT. TIME and REC TIME on the remote control until
the indicators disappear.
NOTE:

Also refer to page 27.

Interval time
indicator
Recording time
indicator
Remote sensor
RM-V700U
(optional)
Transmitted beam
effective area
Remote sensor
When using the remote control, be sure to point it at
the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.