18
EN
SNAPSHOT Button
Power Switch
NOTES:
●After SNAPSHOT is pressed, there is a momentary camera
●Snapshot is available during playback as well. However, the shutter sound is not heard.
RECORDING
Advanced
Features
Snapshot (GR-SXM747UM/SXM347UM only)
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.
1 Set the Power Switch to “
” or “ 
”.
2 Press SNAPSHOT.
If you press during Record-Standby . . .
.... a still image will be recorded for approx.
6 seconds, then the camcorder
If you press during Recording . . .
.... a still image will be recorded for approx.
6 seconds, then the normal recording resumes.
Night-Alive (GR-SXM747UM/SXM347UM only)
Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.
1 Set the Power Switch to “
” or “ 
”.
2 Press
They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The mode is activated.
3 To cancel the effect, press
Power Switch
NOTES:
●During
•“Picture Stabilizer” (☞ pg. 16), “Program AE With Special Effects” (☞ pg. 20) and “Digital Effects” (☞ pg. 21).
•“S.LX” in CAMERA MENU (☞ pg. 23).
●
OFF/AUTO/ON is set to “AUTO” or “ON” (☞ pg. 17).
●During
A NIGHT AUTO
The shutter speed is automatically adjusted (maximum 1/6 sec.).
1 NIGHT 10X*
The shutter speed is set to 1/6th of a second to provide 10 times the sensitivity.
2 NIGHT 60X*
The shutter speed is set to 1 second to provide 60 times the sensitivity.
*Appears when the Power Switch is set to “ 
”.
