18
EN
SNAPSHOT Button
RECORDING
Advanced
Features
Snapshot
Power Switch
NOTES:
●After SNAPSHOT is pressed, there is a momentary camera
●Snapshot is available during playback as well. However, the shutter sound is not heard.
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.
1 Set the Power Switch to “
” or “ 
”.
2 Press SNAPSHOT.
If you press during Record-Standby . . .
.... a still image will be recorded for approx.
6 seconds, then the camcorder
If you press during Recording . . .
.... a still image will be recorded for approx.
6 seconds, then the normal recording resumes.
Power Switch
NOTES:
●During
•“Picture Stabiliser” (☞ pg. 16), “Program AE With Special Effects” (☞ pg. 20) and “Digital Effects” (☞ pg. 21).
•“S.LX” in CAMERA MENU (☞ pg. 23).
●
OFF/AUTO/ON is set to “AUTO” or “ON” (☞ pg. 17).
●During
Night-Scope
Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.
1 Set the Power Switch to “
” or “ 
”.
2 Press
They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The mode is activated.
3 To cancel the effect, press
A NIGHT AUTO
The shutter speed is automatically adjusted (maximum 1/5 sec.).
1 NIGHT 10X*
The shutter speed is set to 1/5th of a second to provide 10 times the sensitivity.
2 NIGHT 50X*
The shutter speed is set to 1 second to provide 50 times the sensitivity.
*Appears when the Power Switch is set to “ 
”.
