MasterPage: Start_Right 
EDITING EN 35
Dubbing To A VCR
To S/AV connector |
| |
S/AV cable | Open the cover. | |
mark | ||
(provided) |
1 2 
3
4
“Y/C”/“CVBS” |
| Cable |
| Adapter* | |
Video Out Select |
| |
|
| |
Switch |
|
|
TV
To VCR
VCR
1 Following the illustrations, connect the camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. ( pg. 20)
3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To choose whether or not the following displays appear on the connected TV
•Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 22, 27)
•Time code
Set “TIME CODE” to “OFF” or “ON”. ( pg. 22, 27)
•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. ( pg. 22, 27)
ATo S-VIDEO IN**
BYellow to VIDEO IN
CRed to AUDIO R IN
DWhite to AUDIO L IN
*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)
**Connect when your TV/VCR has an
NOTE:
Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
