JVC CA-FS400, GVT0128-001A English, Settingthe Clock, AutomaticallyONLY, TurningOff the Power, Changing the Display Brightness, To turn off the unit after playback is over—AutoStandby

Changing the Display Brightness			Remote
			ONLY
You can dim the display window.
DIMMER	DIM 1	DIM 2
	DIM OFF
	(Canceled)
DIM 1	Dims the display.
DIM 2	Erases the display illumination.

Setting the Clock	Remote
	ONLY

Without setting the built-in clock, you cannot use Daily/ Recording Timers (see page 19) and Sleep Timer.

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

CLOCK/

TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Adjust the hour.

SET

3Adjust the minute.

SET

Turning Off the Power

Remote

Automatically ONLYTo turn off the unit after playback is over—Auto Standby

A.STANDBY ON OFF

(Canceled)

When Auto Standby is in use, the A.STANDBY indicator lights on the display.

When the tape or disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.

•Auto Standby does not work while you are listening to radio and the external component (AUX).

To turn off the unit after a certain period of time —Sleep Timer1Specify the time (in minutes).

SLEEP 10 20 30 60 90 120 150

Canceled

2Wait until the set time goes off.To check the time remaining until the shut-off time

SLEEPSLEEP

•If you press the button repeatedly, you can change the shut- off time.

English

Now the built-in clock starts working.

To check the current time during play

DISPLAY

Clock

Source information

13