JVC CA-FSS57, GVT0134-001B manual Using the Timers

Using the Timers Continued

English

Two timers are available—Daily Timer and Sleep Timer.

•Before using these timers, make sure the built-in clock is set correctly (see page 9).

Using the Daily Timer

You can set the timer when the unit is either turned on or in standby mode.

How the timer actually works

When the on-time comes, the unit automatically turns on (the (timer) indicator flashes just before the on-time and

continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby). The timer setting remains in memory until you change it.

•When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the timer has been set, it will be activated at the same time everyday until the timer is turned off.

Before you start...

When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.

On the remote control ONLY:

1 Press CLOCK/TIMER.	CLOCK/
	TIMER

The (timer) indicator lights up and the timer mode indicator (DAILY) flashes on the display. The unit enters the on-time setting mode.

DAILY

Ex.: When the Daily Timer has been selected the last time.

2	Set the on-time you want the unit to	UP
	turn on.
	1) Press UP or DOWN to set the hour,	DOWN
	then press CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press CLOCK/TIMER.

The unit enters the off-time setting mode.	CLOCK/
	TIMER
DAILY

3 Set the off-time you want the unit to turn off.

1)Press UP or DOWN to set the hour, then press CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press CLOCK/TIMER.

The unit enters the source setting mode.

DAILY

UP

DOWN

CLOCK/

TIMER

20