English
Using the Timers (continued)
4 Press 
UP or 
DOWN to select the timer mode and the source to play, then press
CLOCK/TIMER.
•Each time you press 
UP or
DOWN, the timer mode and the source to play change as follows:
UP
DOWN
CLOCK/
TIMER
6 Press 
UP or 
DOWN to set the volume level, then press
CLOCK/TIMER.
•You can select the volume level between “VOLUME –
If you select “VOLUME –
UP
DOWN
CLOCK/
TIMER
DAILY TIMER |
| DAILY TIMER |
CD |
| TUNER |
•“DAILY TIMER CD”: plays the selected disc or your program (Daily Timer).
• Load a disc or make the program.
=go to step 5.
•“DAILY TIMER TUNER”: tunes in to the last station you have been listening to (Daily Timer).
=go to step 6.
5 When selecting “DAILY TIMER CD” in step 4, select the disc number to play or Program
Play.
UP
1)Press 
UP or 
DOWN to select the disc number or Program Play.
• Each time you press the button, the | DOWN |
indication on the display changes as |
|
follows: |
|
CD DISC 1 
CD DISC 2
CD DISC 3
CD PROGRAM
CD DISC 5
CD DISC 4
•“CD DISC 1” – “CD DISC 5”: plays the selected disc.
•“CD PROGRAM”: plays the program you have made.
| CLOCK/ |
2) Press CLOCK/TIMER. | TIMER |
|
The unit enters the volume level setting mode.
The selected timer mode indicator (DAILY) stops flashing.
The unit enters the clock setting mode.
7 | Adjust the clock if needed. |
|
| • See “Setting the Clock” on page 9. | STANDBY/ON |
8 | Press STANDBY/ON to turn off |
|
| the unit if the unit is on. |
|
When the timer turns on the unit, the
(timer)
indicator and the selected timer mode indicator (DAILY) start flashing.
CLOCK/
To deactivate the timer temporarily, press TIMER and hold CLOCK/TIMER until the
(timer) indicator and the selected timer mode indicator (DAILY) go off.
To activate and change the timer, repeat steps 1 to 7 on pages 20 and 21.
•If you want to change the Daily Timer setting, deactivate the timer first.
•To activate the timer again without changing the setting, press CLOCK/TIMER repeatedly until the
(timer) indicator and the selected timer mode indicator (DAILY) light up on the display.
If the unit is already turned on when the
The timer does not work.
When you unplug the AC power cord or if a power failure occurs
The timer will be canceled. You need to set the clock first, then set the timer again.
When you have selected “CD PROGRAM” in step 5
Do not press DISPLAY while the unit is in standby mode to turn off the clock indication (“DISPLAY OFF”); otherwise, the program contents is cleared and playback starts in the Continuous Play mode when the
21
