Continued
English
Programing the Track Playing Order
You can arrange the order in which the tracks play before you start playing. You can program up to 100 tracks.
On the remote control ONLY:
1 Load discs into the
•If the current playing source is not “CD,” press 3/8 CD, then 7 before going to the next step.
2 | Press PLAY MODE repeatedly until | PLAY | |
MODE | |||
|
| ||
| “CD PROGRAM” appears on the |
| |
| display. |
|
The PRGM indicator also lights on the display.
PRGM indicator
1 2 3 4 5
CD PRGM
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press 3/8 CD.
The tracks are played in the order you have programed.
To stop during play, press 7.
To exit from the Program Play mode, before or after play, press PLAY MODE once or twice so that the unit enters another disc playback mode (Random Play or Continuous Play).
The PRGM indicator goes off.
•Turning off the unit or changing the source also cancels Program Play and changes the disc playback mode to Continuous Play.
•Each time you press the button, play mode changes as follows:
To check the program contents
Before playing, you can check the program contents by pressing ¢ or
CD PROGRAM |
| CD RANDOM |
(Program Play) |
| (Random Play) |
Standard display
(Continuous Play)
3 Press one of the disc number buttons (CD 1 – CD 5) to select the disc number you want to play.
Program step number
1 | 2 | 3 | 4 | 5 |
CD | PRGM |
|
|
|
4 | Disc number |
|
Press the number buttons to | 1 | |
| select a track from the disc | 4 |
| selected in the previous step. | |
|
| |
| • For how to use the number buttons, | 7 |
| see “To go to another track directly | 10 |
| using the number buttons” on the | |
|
| |
| previous page. |
|
| Track number |
|
1 2 3 4 5
CD PRGM
CD 1
CD 2
CD 3
CD 4
CD 5
2 3
56
89
+10
4.
•¢: Shows the programed tracks in the programed order.
•4: Shows them in the reverse order.
•Pressing 4 first time after you have programed shows the first track in the program.
To modify the program
Before playing, you can erase the last programed | CANCEL |
track by pressing CANCEL. |
|
Each time you press the button, the last |
|
programed track is erased from the program. |
|
To add tracks to the program before playing, simply select disc numbers and track numbers you want to add on steps 3 and 4.
In the Program Play mode, you cannot open the disc trays.
If you try to program a 101st track
“MEMORY FULL” will appear on the display.
When “NO PROGRAM” appears on the display
•You are trying to program a track from an empty tray, or a track number that does not exist on the disc.
•You are selecting the disc that the unit has not read yet.
18
