JVC GVT0134-001B manual Adjusting the Volume, Reinforcing the Bass Sound, On the remote control

Basic and Common Operations (continued)

Adjusting the Volume

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOLUME MIN” and “VOLUME 1” – “VOLUME 40 (VOLUME MAX).”

On the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

•When you press and hold either button, you can change the volume level continuously.

VOLUME

On the unit:
To increase the volume, turn the	VOLUME
VOLUME + / – control clockwise.
To decrease the volume, turn the
VOLUME + / – control counterclockwise.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume —Active Hyper Bass Pro.

• This function also affects the sound from headphones.

To get the effect, press AHB PRO repeatedly so					AHB PRO
that “AHB BASS1” or “AHB BASS2” appears on
the display.
The AHB PRO indicator also lights up on the
display.
				AHB PRO indicator
1	2	3	4	AHB PRO
				5

CD

•Each time you press the button, the Active Hyper Bass Pro mode changes as follows:

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (standby) the unit with the volume set to an extremely high level; Otherwise, the

sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

AHB BASS1 AHB BASS2

BASS OFF (canceled)

• “AHB BASS2” is more effective than “AHB BASS1.”

To cancel the effect, press AHB PRO repeatedly until “BASS OFF” appears on the display.

The AHB PRO indicator goes off.

11