JVC GVT0150-008US, GVT0150-008UX, GVT0150-008UN, GVT0150-008UG Operating the VCR, Release F VCR/DBS

Operating external components with the remote control

See page 15 for button locations.

5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a GI Jerrold product:

Press 0, then 1.

For a Sony product:

Press 2, then 0.

Manufacturer	Code
Echostar	21
GI Jerrold	01, 02, 03, 04, 05, 06, 07, 08
Hamlin	15, 16, 17, 18
Pioneer	13, 14
RCA	19
Scientific Atlanta	09, 10
Sony	20
Zenith	11, 12

6 Release F VCR/DBS.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the DBS tuner or CATV converter.

IMPORTANT

Before using the remote control to operate a DBS tuner or CATV converter;

1 Set the remote control mode selector to

VCR/DBS.

2 Press DBS.

The following buttons are available:

FVCR/DBS: Turns DBS tuner or CATV converter on and off.

CHANNEL +/–: Changes the channels.

1-10, 0, +10 (100+): Selects the channel.

Operating the VCR

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR/DBS.

2 Press VCR.

3 Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Philips VCR:

Press 0, then 9.

For an NEC VCR:

Press 2, then 5.

Manufacturer	Code	Manufacturer	Code
JVC	01, 02, 03	Philips	09
Emerson	11, 26	RCA	05, 06
Fisher	29	Samsung	24
Funai	10, 14, 15, 16	Sanyo	21, 22, 23
Gold Star	12	Sharp	27, 28
Hitachi	04	Shintom	30
Mitsubishi	13	Sony	18, 19, 20
NEC	25	Zenith	08
Panasonic	07, 17

6 Release F VCR/DBS.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a VCR;

1 Set the remote control mode selector to

VCR/DBS.

2 Press VCR.

The following buttons are available:

FVCR/DBS: Turns VCR on and off. 3 (play button): Starts playback.

7 :	Stops operation.
8 :	Pauses playback.

y: Fast forwards video tape.

1: Rewinds video tape.

REC: Press this button together with 3 (play button) to start recording or together with 8 to pause recording.

CHANNEL +/–: Changes the TV channels on the VCR.

NOTE

When operating a VCR or DBS tuner/CATV converter;

•The source setting of VCR or DBS D remains after you have changed the remote control mode selector to AUDIO or TV. When operating VCR or DBS tuner/CATV converter again, it is not necessary to press VCR or DBS after setting the remote control mode selector.

16