JVC GVT0150-008UG, GVT0150-008UX, GVT0150-008US, GVT0150-008UN, GVT0150-008A manual Sleep Timer Sleep

Basic operations

See page 15 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP.

Each time you press the button, the shut-off time changes. Example:

	minutes
S L E E P	6 0

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

To cancel

Press SLEEP repeatedly until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the subwoofer and speakers

Press each speaker button you want to adjust the output level and then LEVEL +/–.

•FRONT L: Front Left speaker

•FRONT R: Front Right speaker

•SURR. L: Surround Left speaker

•SURR. R: Surround Right speaker

•	CENTER:	Center speaker
•	S.WFR:	Subwoofer

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (A pg. 38)

•The adjustments take effect for all sources.

Adjusting the treble sound [TREBLE]

Press TREBLE and then LEVEL +/–.

NOTE

• The adjustments take effect for all sources.

Adjusting the bass sound [BASS]

Press BASS and then LEVEL +/–.

NOTE

• The adjustments take effect for all sources.

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

NOTE

•To use the system in PROGRESSIVE mode, it is required that the center unit is connected to the TV by using a component video cord (not supplied). (A pg. 11)

7While DVD is selected as the source and stopped

1 Press and hold SCAN MODE for

2 seconds.

“NTSC”, “PAL” or “NTSC PRG”, “PAL PRG” appears on the display window.

2 Press Cursor 3/2 to select the desired mode.

•	NTSC:	Select when your TV supports the NTSC
		interlaced video input only.
•	NTSC PRG:	Select when your TV equipped with
		component jacks supports the NTSC
		progressive video input.
•	PAL:	Select when your TV supports the PAL
		interlaced video input only.
•	PAL PRG:	Select when your TV equipped with
		component jacks supports the PAL
		progressive video input.

You can get better picture quality in NTSC PRG, PAL PRG mode than in NTSC, PAL mode.

3 Press ENTER while the selected mode is displayed.

When “NTSC PRG” or “PAL PRG” is selected, the PROGRESSIVE indicator lights on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•There are some progressive TVs and High-Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a DVD VIDEO in the progressive scan mode. In such a case, change the scan mode to “NTSC” or “PAL”. To check the compatibility of your TV, contact your local JVC customer service center.

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

17