Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptom |
| Cause/Remedy |
No sound comes out at all. | • | Turns on the power of the headphones. |
| • | Start playback on the AV equipment connected to the base |
|
| station. |
| • | Check the connection between the base station and the AV |
|
| equipment. |
| • | Turns up the volume of the headphones or the connected AV |
|
| equipment to an appropriate level. |
| • Fully charge the headphones’ battery. | |
|
|
|
No sound comes out from | • | Check the connection between the base station and the AV |
| equipment. | |
| • | Sound comes out only of |
|
| connected to the monaural audio output. Convert the mini |
|
| plug to the base station from stereo to monaural with the plug |
|
| adaptor (not supplied). |
Sound is distorted. | • | The headphones’ battery will soon run out. Fully charge the |
|
| battery. |
| • | The volume of the headphones and/or the connected AV |
|
| equipment is too high. Adjust their volume to an appropriate |
|
| level. |
|
|
|
Sound is noisy. | • | The headphones’ battery will soon run out. Fully charge the |
|
| battery. |
| • | Switch the base station channel to another and press AUTO |
|
| SCAN on the headphones. |
| • | The volume of the connected AV equipment is too low. Adjust |
|
| the volume as high as possible without causing distortion. |
| • | Too far from the base station. Use the headphones within the |
|
| range of the base station (see page 8). |
|
|
|
Cannot charge the battery. | • | Check the contact of the charging terminals on the base station |
|
| and the headphones. |
| • Check the polarity of the battery. | |
| • The cycle life of the battery ended. Replace with the new | |
|
| battery (see page 6). |
|
|
|
ENGLISH
9