JVC HA-W600RF manual 3Install the batteries, Battery installation, 2Take off the battery covers

Battery installation

1Take off the ear pad of the right headphone.

2Take off the battery covers.

3Install the batteries.

4Put on the battery covers.

5Put on the ear pad.

1 Insert the hem of the ear pad into the slit on the headphone.

Match the polarity (+ and –) on the batteries with the + and – marking on the battery compartments.

•Insert the – terminal of the battery at first.

Be sure to use the supplied exclusive battery. Do not use any other rechargeable or dry cell battery, which may cause malfunctions or damage the unit.

2Turn the ear pad anticlockwise to slide all the hem into the groove on the headphone.

•Be sure that all the hem is inserted fully. If not, turn the ear pad anticlockwise again until all the hem slides in.

5