JVC HAW600RF Basic operations, Listening to the sound from the base station, English, Precaution

Models: HA-W600RF HAW600RF

1 50
Download 50 pages 52.34 Kb
Page 30
Image 30
Manual background

Basic operations

Listening to the sound from the base station

The base station works as the FM transmitter and send sound to the headphones.

Precaution

Turn down the volume of the headphones with the VOL dial before turning on its power to avoid excessive volume.

1Start playback on the AV equipment connected with the base station.

The base station turns on automatically and starts to transmit FM signals (Auto Power On function).

The POWER indicator of the base station lights up.

In some situations, the power may not be turned on automatically by the input sound (e. g. a song with a quiet opening or fade in). This is not a malfunction.

2Press POWER on the

headphones to turn on the power.

The POWER indicator lights up and the headphones automatically starts to tune in to the signal from the base station (Auto Tuning function).

The AUTO SCAN indicator lights up when tuned in.

Press the center of the button firmly when pressing POWER. Pressing the edge may not turn on the power.

Charge the battery in the following cases. The battery ran out:

The POWER indicator does not light up after pressing POWER.

The AUTO SCAN indicator does not light up though the POWER indicator lights up.

No sound is heard while Auto Tuning. It takes a few seconds to tune in.

Press AUTO SCAN when

the sound does not come out properly.

3Adjust the volumes of the

AV equipment and the headphones.

Adjust the volumes within the area about 7 m from the base station to get optimum signal reception.

You can get better sound by setting the volume of the AV equipment as high as possible without causing distortion and that of the headphone lower (except when connecting the AV equipment through LINE OUT jacks).

To Turn off the units

Press POWER on the headphones and stop playback on the AV equipment. The headphones’ POWER indicator goes off.

The base station automatically turns off if no signals come in for about four minutes (Auto Power OFF function).

The white noise may come out when the base station turns off. Take off and turns off the headphones after using.

ENGLISH

7

Page 30
Image 30
JVC HAW600RF Basic operations, Listening to the sound from the base station, English, 2Press POWER on the, Precaution