JVC HR-A630EK Engage RECORDER’S, Timer Mode, Press SP/LP to set the tape speed, Press Timer

6

TIMER

q 6

			4	SP/LP
		ADD TIME
		2
:	1	2	3
PDC	4	5	DAILY
			6
	7	8	9		WEEKLY
						6
3 CANCEL		0			TIMER

4 SP/LP

1 3 OK 5

Satellite Receiver Users

To timer-record a satellite broadcast using Video Plus+, perform steps 1 – 6 and, before the selected programme begins, select the appropriate channel on the satellite receiver. Then set the receiver's timer. If your satellite receiver doesn't have a timer, leave the unit's power switched on.

23

4	SET TAPE SPEED
	Press SP/LP ( ) to set the tape speed.
	RETURN TO NORMAL
5	DISPLAY
	Press OK.
	● Repeat steps 1 – 5 for each additional programme.
	ENGAGE RECORDER’S
6	TIMER MODE
	Press TIMER.

NOTE:

For safety, your recorder disables all other functions while in the Timer mode. If you want to use the recorder but its Timer mode is engaged, press TIMER and all other functions are operable.

To re-engage the timer, press TIMER.

To Delay The Stop Time . . .

. . . press ADD TIME (NUMBER key "5") after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). "W" or "D" appears on the front display panel.

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).