JVC HR-A631EK, HR-A630EK SET A/B Code Switch, RE-SUPPLY Power, Remote A/B Code Switching

16

PLAYBACK (cont.)

OPERATE REW

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

A/B CODE

q 6

OPERATE

2

1	REMOVE POWER SUPPLY
	Unplug the mains power cord from the mains outlet.
2	SET A/B CODE SWITCH
	Set to B.
	RE-SUPPLY POWER

1 2 3

4 5 6

7 8 9

0

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

Press OPERATE on the remote control. The recorder

4 will now only respond to B code signals.

REW

3

1

NOTE:

Some TV sets may malfunction in response to the B mode. If this happens, switch back to the A mode.

Next Function Memory

You can set your recorder's power to go off automatically after the tape is fully rewound. Before starting, make sure the recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press OPERATE within 2 seconds.