26
TIMER
RECORDING(cont.)
Check And Cancel Programmes
q 6
|
| 2 |
|
|
: | 1 | 2 |
| 3 |
PDC | 4 | 5 |
| 6 |
|
| |||
| 7 | 8 |
| 9 |
CANCEL |
| 0 |
|
|
|
|
|
| |
START+/– |
|
|
| TV PROG. |
|
|
|
| |
|
| STOP+/– |
| DATE+/ |
|
|
| – | |
|
|
|
| |
|
|
|
| .CHECK |
|
|
|
| PROG |
| 1 |
| 3 | OK |
ACCESS PROGRAMME
DISPLAY
1 Press PROG CHECK. The recording start and stop times appear on the front display panel. Then press OK and the date and the preset position appear. Each time you press PROG CHECK the next program’s information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL. All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2 Input the appropriate data using the START
PDC Recording
Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over advertised times you preset in the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.
To Use PDC Service . . .
The default setting for PDC is "ON". To cancel PDC, press 
: PDC (NUMBER key “7”) so that the PDC indicator (
) on the display panel disappears during Video Plus+ or regular timer programming.
NOTES:
●When you manually enter programmes (regular timer programming), set the start time (PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.
●PDC Recording is also possible when a satellite tuner or a cable box is connected to AV2 IN on your recorder.
