JVC HR-DD840KR manual Hi-Fi Audio Recording Level Control, Or Push JOG , then press OK

OK

q

CH

MENU

1 2 3

4 5 6

7 8 9

0

CH

FF

REW

OK

MENU

PUSH JOG

EN39

Hi-Fi Audio Recording Level Control

Your VCR allows manual adjustment of the Hi-Fi audio recording level. Although the preset audio recording level is satisfactory for normal recording, if the sound you are going to record is too loud or too low, adjust the audio recording level while referring to the VCR's audio level meters.

ACCESS MAIN MENU SCREEN

1 Press MENU as many times as necessary.
	ACCESS FUNCTION SET SCREEN
	Press CH 5° or PUSH JOG 5° to move the highlight
2 bar (arrow) to “FUNCTION SET”, then press OK.
3	ACCESS AUDIO SELECT SCREEN
	Move the highlight bar (arrow) to "AUDIO SELECT" by
	pressing CH	5°	or PUSH JOG , then press OK.
				5°
	ACCESS HI-FI REC LEVEL SCREEN
	Press CH 5° or PUSH JOG 5° to move the highlight
4 bar (arrow) to “HI-FI REC LEVEL”, then press OK.
	SELECT MODE
	Move the highlight bar			HI-FI REC LEVEL CONTROL
	(arrow) to “MANUAL” by
5 pressing CH 5° or PUSH					PRESET
					=MANUAL
	JOG 5°.			PRESS		PRESS
				(REW)		(FF)
				MIN------*------MAX
				PRESS (5, °) TO SELECT
				PRESS (MENU) TO END
	ADJUST AUDIO RECORDING
6	LEVEL
	Press FF or REW.

●To move the on-screen's audio levels by one division of the scale, press FF or REW briefly for 5 times in succession. To move the audio levels faster, keep FF or REW presssed.

●Adjust the recording level while watching the VCR's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.

RETURN TO NORMAL SCREEN

7 Press MENU as many times as necessary to exit.

NOTE:

Noise will increase if the recording level is too low, while distortion will increase if the level is too high.