JVC HR-DD840KR manual Edit To Or From Another

EDITING

EN47

You can use your VCR as the player or the recorder.

Edit To Or

From Another 1

VCR

	VIDEO OUT	2
Player	Your VCR
		3
	AUDIO OUT
	Audio/Video cable
	(supplied)
VIDEO IN	AUDIO IN

4

Recorder Another VCR

5

MAKE CONNECTIONS

Connect an AV cable between the player’s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.

●When using your VCR as the recorder and a monaural VCR as the player, connect the player’s AUDIO OUT connector to the AUDIO IN L connector on the recorder.

LOAD CASSETTES

Insert the playback cassette into the player and the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

Set to AUX. With this VCR, press NUMBER key “0” (AU appears on the front display panel in place of a channel number).

NOTE:

When using this VCR as the recorder, make sure to select "FRONT" or "REAR" (depending on which input connectors you use) at the Aux Input Screen. (To select the correct AUX input connector, follow steps 4, 5, 9 – 11 from the "Edit From A Camcorder" section, ☞ pg. 48.)

START PLAYER

Set to its play mode.

NOTE:

If the player is equipped with a superimpose/OSD disable feature then set "SUPERIMPOSE" to OFF before pressing PLAY (☞ pg. 26).

START RECORDER

Set to its record mode.

1 2 3

4 5 6

7 8 9

NOTE:

If you use an auxiliary input to connect a cable box or DBS receiver and if you have used this VCR as the recording deck for editing, make sure that the correct input ("FRONT" or "REAR") is selected after you have finished editing (☞ step 3).

0