JVC HR-DD848E Setup, Showview, Make List Of Stored Station Names And Channel Positions, Screen

10ENINITIALSETTINGS(cont.)

SHOWVIEW

Setup

Turn on the TV and select the VIDEO channel (or AV mode).

	2
1	2	3
4	5	6
NUMBER
7	8	9
CANCEL	0	4

With SHOWVIEW, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

NOTE:

“Guide Program (GUIDE PROG) Number” refers to the assigned TV station numbers, according to broadcast area, for SHOWVIEW timer recording.

IMPORTANT

Perform the following procedure after Auto Set Up on page 4 and/or the channel setting steps on pages 42 – 45, and after the Clock Set procedure on page 47.

After setting the Guide Program Numbers, the station names and channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Program Number setting.

Guide Program Number Set

MAKE LIST OF STORED

STATION NAMES AND

CHANNEL POSITIONS

1
	(Ex.) Channel position		Station name
		1	ARD
	2		ZDF
	3		WDR

MENU

PUSH JOG

3 OK

1

	ACCESS MAIN MENU
	SCREEN
2 Press MENU twice.
	ACCESS GUIDE PROG SET
3	SCREEN
	Press PUSH JOG %Þ to move the highlight bar
	(pointer) to "GUIDE PROG SET", then press OK.
	The Guide Prog. Set screen appears.
		MAIN MENU		GUIDE PROG SET
		MODE SET
		AUTO CH SET
		MANUAL CH SET		GUIDE PROG	TV PROG
		GUIDE PROG SET	1		1
		CLOCK SET
				: AUTO SET BY SHOWVIEW
				[5]: MANUAL SET
		[5°] =		[5°] : ?
		[MENU] : EXIT		[MENU] : EXIT