JVC Auto Set Up, Turn On The Recorder, Select Country, Initialsettings, For HR-DD848E

4EN

INITIALSETTINGS

Auto Set Up

Auto Channel Set/Auto

Clock Set/Auto Guide

Program Number Set

When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Country Set display will appear on the TV screen and the recorder's front display panel. By simply selecting your country*, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.

*If you live in Belgium or Switzerland, you also need to select the language you use.

You can refer to the front display panel and/or the on-screen display to perform this procedure.

W	SLOW
q

Before starting, make sure of the following:

●The TV aerial cable should be connected to the recorder.

●The recorder's mains power cord should be connected to a mains outlet. ☞ pg. 3

●If you want to use the on-screen display, the TV should be set to its AV mode (with AV connection ☞ pg. 3) or UHF channel 36 (with RF connection ☞ pg. 3).

2

1 2 3

4 5 6

7 8 9

04

3 OK

1

PUSH JOG

1

TURN ON THE RECORDER

Press on the recorder or remote control. The Country Set display appears on the front display panel and/or on the screen.

For HR-DD848E	For HR-DD848EH
DEUTSCHLAND	SUOMI
ÖSTERREICH	NORGE
SUISSE	SVERIGE
ITALIA	DANMARK
NEDERLAND	OTHERS
GREECE
OTHERS
[5°] =	[5°] =
[MENU] : EXIT	[MENU] : EXIT

International Telephone Country Code

SUOMI	: 358	SUISSE	: 41
PORTUGAL	: 351	ITALIA	: 39
DEUTSCHLAND : 49		ESPAÑA	: 34
NORGE	: 47	BELGIUM	: 32
SVERIGE	: 46	NEDERLAND : 31
DANMARK	: 45	GREECE	: 30
ÖSTERREICH	: 43	OTHERS	: - -

For HR-DD848EH

PORTUGAL

ESPAÑA

BELGIUM

OTHERS

[5°] = [MENU] : EXIT

*The on-screen display differs for the HR- DD848EH depending upon the country in which the product was purchased.

*Depending on the model, the selectable codes may be limited.

ATTENTION

Once you have performed Auto Set Up, even if the recorder's memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder's memory and the recorder will not perform Auto Set Up again. You only need to set the clock. (☞ pg. 47)

If you have moved to a different area, perform each setting as required.

●Tuner setting ☞ pg. 42

●Clock setting ☞ pg. 47

●SHOWVIEW Guide Program number setting ☞ pg. 10

If a new station starts broadcasting in your area, perform both tuner setting (☞ pg. 42) and SHOWVIEW Guide Program number setting (☞ pg. 10).

2

NOTE:

If you have connected your TV to the recorder with RF connection and the on-screen display appearing on UHF channel 36 looks distorted, perform this procedure referring to the front display panel.

SELECT COUNTRY

If you are referring to the front display panel

Press PUSH JOG%Þ to select your international telephone country code of your country referring to the chart in the left column.

●If you have selected a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step 4.

●If you have selected 32 (BELGIUM) or 41 (SUISSE), go to step 3.

CONTINUED ON NEXT PAGE.