JVC HR-DD848E Basic Connections, Installingyournewrecorderen, Check Contents, Situate Recorder

INSTALLINGYOURNEWRECORDEREN

3

Basic Connections

Aerial terminal

Back of TV

21-pin SCART

connector

TV Aerial

Cable

RF Cable

(provided)

21-pin SCART Cable

AV1 IN/OUT

Mains Power

Cord

Rear view

Mains outlet

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in “Specifications” (☞ pg. 55).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
3	CONNECT RECORDER TO TV
	The connection method you use depends on the type
	of TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and
	the TV’s aerial terminal.
	Before operating the recorder, make sure the TV’s
	channel is set to the VIDEO channel (☞ pg. 8).

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the

AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.