JVC hr-dvs3u manual Access the Cable Box Set screen, Turn on the cable box

EN 21

T	2	W
1		3

2

4 5 6

7 8 9

04

1 DV S-VHS

D Access the Initial Set screen.

Press rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.

E Access the Cable Box Set screen.

Press rt to move the highlight bar (arrow) to “CABLE BOX SET”, then press OK or e.

Setting cable box's brand and channel

After installation, set the cable box’s brand and channel correctly; otherwise, the Controller cannot work correctly.

Turn on the TV and select the AV mode.

A Turn on the VCR.

Press POWER.

B Turn on the cable box.

Turn on the cable box’s power.

C Access the Main Menu screen on the VCR.

F Select the cable box’s channel.

Your selection depends on how the cable box is connected to your VCR.

If the cable box is connected to your VCR’s ANTENNA IN connector on the rear panel,

press rt until the channel number representing the cable

box’s output (CH2 – CH9) appears on the screen.

If the cable box is connected to your VCR’s AUDIO/ VIDEO IN connectors on the rear panel, press rt until

“ON L-1 (REAR)” appears on the screen.

If you do not use a cable box, press rt until “OFF”

appears on the screen.

Press MENU.