EN 33

T

2

W

1

3

2

4 5 6

7 8 9

04

1

 

 

 

DV

 

 

 

S-VHS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Elapsed Recording Time Indication

1Set the counter display.

Press DISPLAY/OSD until a counter reading appears on the front display panel.

2Reset the counter.

Press C.RESET before starting recording or playback.

The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press DISPLAY/OSD until the time remaining on the tape appears on the front display panel.

The front display panel shows the tape remaining time with “z” displayed.

By pressing the DISPLAY/OSD button, you can change the display to show the counter reading, tape remaining time, channel position* or clock time.

*Channel position is not displayed during playback.

NOTES:

When you press DISPLAY/OSD, the on-screen display appears ( pg. 10) on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press DISPLAY/OSD.

Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Page 33
Image 33
JVC hr-dvs3u manual Tape Remaining Time, Set the counter display, Reset the counter