74 EN, For Example | JVC hr-dvs3u guide

74 EN

SUBSIDIARY SETTINGS (cont.)

VHS MODE SET (cont.)

* The default setting is bold in the table below.

8 AUTO SP]EP TIMER		When this function is set to “ON”, the VCR automatically switches to EP mode to
ON		allow complete recording if there is not enough tape to record the entire program
OFF		while timer-recording in SP mode.
		For Example . . .
		Recording a program of 140 minutes in length onto a 120-minute tape
		Approximately 110 minutes	Approximately 30 minutes

		SP mode	EP mode
		Total 140	minutes
		Make sure you set this function to “ON”, before the timer-recording starts.
		NOTES:
		● If you have programed the VCR to timer-record 2 or more programs, the second program
		and those thereafter may not fit on the tape if you set “AUTO SP]EP TIMER” to “ON”. In
		this case, make sure the mode is not engaged, then set the tape speed manually during
		timer programing.
		● In order to ensure that the recording fits on the tape, this feature may leave a slight non-
		recorded section at the end of the tape.
		● There may be some noise and sound disturbance at the point on the tape where the VCR
		switches from SP to EP mode.
		● The Auto SP]EP Timer feature is not available during ITR (Instant Timer Recording), and
		the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and
		T(ST)-120.

8 BLUE BACK		When this function is set to “ON”, the TV screen becomes all blue when receiving
ON		a channel not in use.
OFF		NOTE:
		NOTE:
		When you want to receive an unstable channel with poor signals, set this function to “OFF”.

8 DIGITAL TBC/NR		Your VCR is equipped with the Digital TBC (Time Base Corrector) that removes
ON		jitter from fluctuating video signals to deliver a stable picture even with old tapes
OFF		and rental cassettes.
		The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear
		picture reproduction is also linked to this function.
		We recommend that you set “DIGITAL TBC/NR” to “ON” when ...
		... playing back a tape recorded on a camcorder.
		... playing back a tape repeatedly used.
		... using this VCR as the source player for editing.
		NOTES:
		● If you play back a tape recorded under poor TV reception condition, the picture may
		become more stable with Digital TBC/NR set to off.
		● When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types of
		signals are recorded (using a PC or some character generators), the playback picture may
		be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.

Image 74

JVC hr-dvs3u manual 74 EN, For Example

Contents

Video Cassette Recorder For Customer Use Dear Customer Moisture Condensation Important Product Safety Instructions Damage Requiring Service AccessoriesCleaning Replacement Parts Contents Front View Rear View Front Display Panel How To Use Remote To recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSD ON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCR 8To connect to a TV with S-VIDEO/AUDIO input connectors Video Connection Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 EN Language 16 EN Access the Clock Set screenClock Set Preparations Semiauto Clock Set Manual Clock Set 18 EN Access the Tuner Set screenTuner Set Auto Channel Set To add channels Manual Channel SetAdd or skip the desired channels To skip channels Installing Controller 20 EN Select the cable box’s channel Access the Cable Box Set screenTurn on the cable box If you do not use a cable box, press rt until OFF Press OK or e 22 ENEnter the cable box’s brand If the cable box’s channel does not change to DBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFF Enter the DBS receiver’s brand If the DBS receiver’s channel does not change as shown above VHS deck Basic Playback26 EN Start recording Choose a programSet the tape speed Pause/Resume recording Pause during playback 28 ENSlow Motion On the VCR Activate frame-by-frame playback Slow Motion On the Remote Variable Speed Search On the Remote Repeat Playback 30 ENIndex Search Next Function Memory Soundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic tracking Record One Program While Watching Another Instant Timer Recording ITR32 EN Tape Remaining Time Reset the counterPress C.RESET before starting recording or playback Set the counter display Second Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback Select the DV deck 36 ENDV deck Press DV DV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code 42 EN Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deck For the DV deck Engage the VCR’s timer modeFor the VHS deck Cable Box or DBS Receiver Users Guide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel number Guide Channel Number Enter the receiving channel position number Express Timer Programing 46 EN Press DATE+ Enter the program dateEnter the channel position Press CH+ 48 EN Enter the program mode24HR Quick Programing Set the program start/stop time and channelPage Cancel or change a program Disengage the timer modeAccess the Program Check screen Return to the timer mode Select the program to modify Cancel or change program settingConfirm the overlapping programs Overlapping programs blink on the TV screen From DV to VHS Tape Dubbing52 EN Dubbing An Entire Cassette From VHS to DV Press DV, then press SP/LP p Prepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbing Locate the start point on the VHS deck Prepare the DV deck for dubbing 56 EN Recorder Player Start the source player Set the input mode of recording deck58 EN Start the recording deck PC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCR VHS Audio Dubbing Audio Dubbing60 EN DV Audio Dubbing Press A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing VHS Insert Editing Insert Editing62 EN Source tape Prepare the recording cassette Engage the Insert Editing modeAV Insert Editing VHS deck only Start Editing Select the program Access the R.A.Edit screen64 EN Press R.A.EDIT. The R.A.Edit screen appears Start Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble Editing Change the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same Remote Operate the TV TV Multi-Brand Remote ControlSet the TV brand code Before performing the following steps Set the Cable Box brand code Press the corresponding button Power68 EN Operate the Cable Box Operate the DBS receiver DBS Receiver Multi-Brand Remote ControlSet the DBS receiver brand code Select the mode Mode SetAccess the Mode Set screen Select the mode setting Mode SET When this function is set to on VHS Mode SET 72 EN VHS Mode SET 74 EN For Example Normally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played back DV Mode SET 76 EN Power 78 EN Recording VHS deck DV deck Timer Recording 80 EN Recording Timer RecordingPlayback 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting VCR Plus+ Timer Programing HOW to Locate Your JVC Service Center 84 EN Warranty Only in U.S.A 86 EN