EN 51
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 |
| |
Program 1 |
|
|
|
|
CH10 |
|
|
| |
Program 2 |
|
|
| Not recorded |
CH40 |
|
| ||
|
| |||
Pattern 2: The program starting earlier will be recorded.
10:00 | 11:00 | 12:00 | |||
Program 1 |
|
|
|
|
|
| CH10 |
|
|
| |
|
|
| Not recorded | ||
Program 2 | CH40 |
| |||
| |||||
Pattern 3: The program starting earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | |||
Program 1 | CH10 |
|
|
|
|
| Program 2 |
|
|
|
|
|
|
|
| CH40 | |
|
| Not |
| recorded | |
|
|
| |||
ATTENTION
If the program you have just made and “DV” are blinking, there is a conflicting program on the DV deck.
A Press rt to move the highlight bar to “DV”, then press OK or e.
DV Program Check screen appears.
B Cancel or change program setting as described in step 2 and 3 in the right column.
When programs overlap each other
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.
The Program Check screen appears and conflicting programs will start blinking.
Example: Program 1 (you have just made) and Program 4 overlap each other on the VHS deck.
A Confirm the overlapping programs.
Overlapping programs blink on the TV screen.
B Select the program to modify.
Press rt, then press OK or e.
●You can only select one of the overlapping programs.
NOTE:
If you do not mind this overlap, press PROG to finish the timer program setting. See “ATTENTION” in the left column. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 3 minute, the VCR will return to the normal screen.
C Cancel or change program setting.
To cancel a program, press CANCEL when the Program screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.
To change a program, press the appropriate button:
NOTE:
If the overlap is not yet solved, or another overlap occurs with the timer program setting after making the last correction on a program, the conflicting programs will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.
