JVC HR-J231SA Activate Instant Review, Activate Intelligent, Picture, Activate Repeat Playback

12PLAYBACK (cont.)

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

Intelligent Picture

To get a better picture when viewing tapes with noise such as rental tapes. Useful for normal playback of SP(or LP)-mode recorded tapes as well.

NOTES:

●Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

●Turn on the TV and select the VIDEO channel (or AV mode).

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on, then "ª 1" appears on screen and the recorder searches for the index code indicating the start of the last timer- recorded programme. Once it’s found, playback begins automatically.

If you have, for example, 3 programmes and wish to watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.

Repeat Playback

Your video recorder can automatically play back the whole tape 20 times repeatedly.

		ACTIVATE INTELLIGENT
	1	PICTURE
		During playback or stop, press PICTURE.
		● lights.The INTELLIGENT PICTURE indicator on the recorder
		● To turn it off, press PICTURE again.
		● Intelligent Picture is not effective during search, slow,
		still, or frame-by-frame playback even though the
		INTELLIGENT PICTURE indicator on the recorder
		lights.
Tape Position Indicator
The tape position indicator appears
on screen when, from the Stop
mode, you press FF, REW or
perform an Index Search. The
position of “5” in relation to “0”			3
(beginning) or “+” (end) shows you 0 +				+ +
where you are on the tape.			1:23:45

”O.S.D.” (☞ pg. 5) must be set to “ON”, or the indicator will not appear.

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

1

2

3

START PLAYBACK

Press PLAY.

ACTIVATE REPEAT

PLAYBACK

Press PLAY and hold for over 5 seconds, then release.

●"PLAY" on the display panel blinks slowly.

●The tape plays 20 times automatically, and then stops.

STOP PLAYBACK

Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.