JVC HR-J6004UM, HR-J4004UM instruction manual Engage Timer Mode

PUSH JOG OK

ª £

q 2 5/8 3

MENU

1 2 3

4 5 6

7 8 9

0 TIMER

1•• 3 •• Á

¦ 7 8

4¢

MENU

PUSH JOG

OK

EXAMPLE
If you program the VCR to timer	PROGRAM 1
record a show on September 6
	DATE	9/ 6 SAT
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the	START	12:00 PM
	STOP	1:00 PM
screen will look like this:	CHANNEL	40 SP

29

6	MAKE CORRECTIONS
	To change any of the settings, press OK or PUSH JOG
	%%until the item you want to change begins blinking.
	Then set as in step 5.

	RETURN TO NORMAL
7	SCREEN
	Press MENU as many times as necessary.
	● Press just once to access the Auto Timer screen
	(☞ pg. 32).
8	ENGAGE TIMER MODE
	Press TIMER. The VCR turns off automatically.

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections (if the lithium battery is not exhausted).

●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

●If you enter a start time that has already passed, ERROR appears on the screen and flashes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable or satellite channels through an external tuner, be sure to keep the Cable Box or satellite

receiver's power ON.

PRESS NUMBER KEY(0-9) OR (5,°), THEN (OK)

PRESS (MENU) TO END