JVC HR-J4004UM, HR-J6004UM instruction manual On-Screen Timer Programming

28TIMERRECORDING(cont.)

On-Screen

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

OK

ª £

q 2 5/8 3

MENU CH

1	2	3
MBER
4	5	6
"8"
NUMBER	8	9
7			NUMBER "9"
	0
			CH
1••	3		•• Á

¦ 7 8

4¢

MENU	PUSH JOG
OK

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 6).

1		LOAD A CASSETTE
		Make sure the record safety tab is intact. If not, cover
		the hole with adhesive tape, then load.
		● The VCR comes on, and the counter is reset, automatically.
		ACCESS ON-SCREEN
		MENU
2 Press MENU to bring up the Main Menu screen.
		ACCESS PROGRAM SET
3		SCREEN
		Make sure the arrow is to	PROGRAM 1
		the left of "PROGRAM
			DATE	- - / - -
		SET", then press OK.
			START	- - : - - AM
			STOP - - : - - AM
			CHANNEL	- - SP
			PRESS NUMBER KEY(0-9)
			OR (5,°), THEN (OK)
			PRESS (MENU) TO END
		SELECT PROGRAM NUMBER
		Press the appropriate NUMBER keys or CH5° or
		PUSH JOG%Þ to select a vacant program number, then
4 press OK. The first time you do this, all numbers will be
		vacant, so just press OK when the screen appears.
		SET PROGRAM
5		INFORMATION
	Þ
		Press the appropriate NUMBER keys to set the date,
	start/stop time and channel number. Press CH5° or
	PUSH JOG% to set AM/PM and tape speed. Then
		press OK after AM/PM, channel number and tape speed
		settings. The next setting that can be set begins flashing.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° or PUSH JOG%Þ buttons. (In this case, press OK after each setting.)

Do not use the CH ° or PUSH JOG Þ button to set the date.

NOTES:

●If you are using a cable box, enter the cable box channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box. (The cable box channel is the VCR's channel that displays the channels received by the cable box.)

●To timer-record cable or satellite channels through an external tuner connected to the VCR's external input connectors, press the NUMBER key "0" so that "AUX" appears instead of a channel number.

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears.