26TIMERRECORDING

Instant Timer Recording (ITR)

2

2

q

5/8 6

 

REC

I T R

R E C

VIDEO SP

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished.

START RECORDING

1 Press REC.

ENGAGE ITR MODE

2 Press REC again. ITR blinks and 0:30 appears on the front display panel.

SET RECORDING

DURATION

3 If you want to record for more than 30 minutes, press REC to extend the time. Each press extends recording time by 30 minutes.

NOTES:

You can only perform ITR using the REC button on the VCR's front panel.

After you set the time, the previous display reappears.

To check remaining recording time, press REC once during recording and the remaining time is displayed for about 5 seconds. Be careful not to press again during this 5 seconds, or you’ll add 30 more minutes to the recording.

On-Screen

Timer

Programming

* Refer to the illustration on page 27.

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (pg. 7).

LOAD A CASSETTE

1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load.

The VCR comes on, and the counter is reset, automatically.

ACCESS PROGRAM SET SCREEN

2

Press MENU, then press

PROGRAM 1

OK.

 

 

 

DATE

- - / - -

 

START

- - : - - AM

 

 

STOP

- - : - - AM

 

 

CHANNEL

- - SP

 

 

PRESS NUMBER KEY(0-9)

 

 

OR (5,°), THEN (OK)

 

 

PRESS (MENU) TO END

Page 26
Image 26
JVC HR-J433U manual Instant Timer Recording ITR, On-Screen Timer Programming, Engage ITR Mode, SET Recording Duration