JVC HR-J433U manual Clock

INITIALSETTINGS7

Clock

OK

POWER

2 2

q 5/8 6

MENU CH 5°

POWER

1	2	3
4	5	6
7	8	9
TV/VIDEO	0
		CH5°

OK

MENU

SHUTTLE PLUS 5°

ATTENTION CABLE BOX SUBSCRIBERS

If you perform Auto or Semi-Auto clock setting procedures . . .

●Select the PBS channel on your cable box before plugging your cable box into the AC outlet. (If you have more than one PBS channel, you may have to select the PBS channel if Auto clock setting is not successful.)

●The cable box must be set to the PBS channel at clock adjustment times, or the adjustment will not take place.

●If you perform Auto clock setting successfully, D.S.T. will be set to “AUTO”. In this case, once the D.S.T. adjustment time comes (☞ pg. 9), your cable box must be set to the PBS channel in your area or the adjustment will not take place. If this is not satisfactory, change the D.S.T. setting to “ON” or “OFF” (Semi-Auto procedure, step 6 or Manual procedure, step 3).

The time and date can be set automatically from additional clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the "Host Channel" and it is a PBS channel in your area. With the antenna cable connected, your VCR can automatically set the clock when the power plug is first connected to an AC outlet.

The auto clock function scans all the channels received by your VCR to find the clock setting data of the Host Channel.

*Don’t turn the power on until the time (or “- - : - - ”) appears on the front display panel.

Before the clock is set, AUTO appears on the display.

NOT SET SET

AM

After setting, the current time appears (in hours and minutes).

The automatic clock setting function will normally set the clock correctly. However, if an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the Semi- Auto (☞ pg. 9) or Manual (☞ pg. 10) clock setting procedure.

If "AUTO" remains in the display for more than 30 minutes, perform the Semi-Auto (☞ pg. 9) or Manual (☞ pg. 10) clock setting procedure. In the case of Semi-Auto, you have to set the Host Channel manually.

If "AUTO CLOCK SET" or "SEMI-AUTO CLOCK SET" is selected, the clock will be adjusted automatically by the Host PBS every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) according to the incoming PBS channel clock setting data. (Automatic clock adjustments can only be received when the VCR’s power is turned off.)

If “- - : - - ” appears on the display, your antenna cable may not be connected to the VCR, there may not be a Host PBS signal available in your area, or your cable box may not be set to the PBS channel. If everything is connected and set correctly, perform the manual clock setting procedure (☞ pg. 10).

Preparation

1	TURN ON THE VCR
	Press POWER. If watching channel 3 or 4, press
	TV/VIDEO to select the VIDEO mode. VIDEO is
	displayed on the front display panel.
	ACCESS ON-SCREEN
2	MENU
	Press MENU to bring up the Main Menu screen.
	ACCESS CUSTOM SET
3	SCREEN
	At the Main Menu screen,	MAIN MENU
	place the arrow next to
		PROGRAM SET
	“CUSTOM SET” by
		FUNCTION SET
	pressing CH5° or	TUNER SET
	SHUTTLE PLUS 5°, then	=CUSTOM SET
	press OK.	VIDEO CALIBRATION
		PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END